Table of Contents
Advertisement
Menu
(continued)
„ GPI TALLY
„
GPI TALLY
TALLY
TALLY1
CAM1
TALLY5
CAM5
Item
Setting value
TALLY OUT
OFF
ON
TALLY1
CAM1
⁞
CAM200
TALLY2
CAM1
CAM2
⁞
CAM200
TALLY3
CAM1
⁞
CAM3
⁞
CAM200
TALLY4
CAM1
⁞
CAM4
⁞
CAM200
TALLY5
CAM1
⁞
CAM5
⁞
CAM200
Note
z The TALLY notification is sent if there are applicable cameras in the currently selected camera group.
z
Cameras are not notified even if there is TALLY input for CAMERA groups that are not currently selected.
AW-UE70
OUT
OFF
TALLY2
CAM2
Set whether to send a TALLY notification to the camera if TALLY is input through the port of the
TALLY/GPIO connector.
When connecting multiple remote camera controllers to control cameras, set this to [OFF] when
the TALLY ON/OFF operation is not to be performed. When the TALLY ON/OFF operation is to be
performed, make sure there is no duplication of camera allocations.
ON: Notify
OFF: Do not notify
Select the camera to send the TALLY notification to when there is an R_TALLY_1 or G_TALLY_1
input through the port of the TALLY/GPIO connector.
Select the camera to send the TALLY notification to when there is an R_TALLY_2 or G_TALLY_2
input through the port of the TALLY/GPIO connector.
Select the camera to send the TALLY notification to when there is an R_TALLY_3 or G_TALLY_3
input through the port of the TALLY/GPIO connector.
Select the camera to send the TALLY notification to when there is an R_TALLY_4 or G_TALLY_4
input through the port of the TALLY/GPIO connector.
Select the camera to send the TALLY notification to when there is an R_TALLY_5 or G_TALLY_5
input through the port of the TALLY/GPIO connector.
TALLY3
CAM3
Setting details
56
1/1
TALLY4
CAM4
___ indicates factory default settings.
Advertisement
Table of Contents
