Table of Contents
Advertisement
Parts and their functions
Color adjustment section
AWB
BARS button [BARS]
Use this to select the video signal output from the remote camera.
Each press switches between the signal for the images shot by the
camera and the color bar signal.
Off : Outputs the signal for the images shot by the camera
On : Outputs the color bar signal
AWB button [AWB]
Use this to execute automatic adjustment of the white balance and
then register the adjustment result to memory A or B of the remote
camera.
The AWB button indicator turns on during white balance adjustment
and turns off when adjustment is successful.
The indicator blinks when adjustment is not possible.
z When automatic adjustment of the white balance ends, the R GAIN
z
and B GAIN values become ±0.
ABB button [ABB]
Use this to execute automatic adjustment of the black balance.
When the button is pressed, adjustment is performed by
automatically closing the iris.
The ABB button indicator turns on during black balance adjustment
and turns off when adjustment is successful.
The indicator blinks when adjustment is not possible.
Preset memory selection section
STORE
DELETE
PRESET
STORE button [PRESET STORE]
When holding down the STORE button, it will light up and a preset
can be registered. When any of the preset memory selection buttons
(I) is pressed in this condition, the registration of preset is complete.
To cancel the preset registration, press the STORE button to turn it
off.
DELETE button [PRESET DELETE]
When holding down the DELETE button, the preset can be deleted.
When any of the preset memory selection buttons (I) is pressed in
this condition, the deletion of preset is complete.
After the preset is deleted, the button turns off.
To cancel DELETE before executing it, press the button.
(continued)
BARS
ABB
1
2
3
4
PRESET MEMORY SELECTION
6
7
8
9
I Preset memory selection buttons
[PRESET MEMORY SELECTION 1 to 10]
Use these to recall the preset of the preset group that was set on the
status screen.
STORE button () is lit:
Use these to register the number of the preset in the preset group
that was set in the status screen.
DELETE button () is lit:
Use these to delete the data of the preset in the preset group that
was set in the status screen.
User button section
USER buttons [USER 1] to [USER 4]
Use these to access the functions assigned to USER 1 to USER 4.
Off : The function is disabled.
On : The function is enabled.
SHIFT button [SHIFT]
When the button is lit, USER buttons 1 to 4 change to USER buttons
5 to 8.
The USER 5 to 8 are displayed in the USER settings on the status
screen.
5
10
13
USER 1
USER 2
USER 3
USER 4
SHIFT
Advertisement
Table of Contents
