Group Scan (Gs) Mode - Uniden UH5040R Owner's Manual

Operation

Group Scan (GS) Mode

Allows you to monitor a Priority (Instant) Channel while scanning (Instant Priority
channel see p.20).
To use GS Mode Scanning, press [OS/GS]. GS icon appears on the display.
GS Scanning checks the Instant Priority Channel for activity regularly.
If the Priority Channel becomes active the radio will stay on that channel for as long as
the signal is present. If the received signal ceases, Priority Scanning continues after 3
seconds.
If scanning stops on a channel which is not a Priority Channel, UH5040R will continue
monitoring the Priority Channel for activity while listening to the active one.
To deactivate SCAN, press the [SCAN] button or the PTT button on the microphone.
If SCAN is deactivated while it is tuned to an active channel, the
UH5040R will stay on that active channel.
If none of the channels are active, the UH5040R will reinstate the scan
NOTE
start channel.
If OS/GS Scanning is initiated when there are no channels programmed
in OS/GS memory, an error tone will be heard and scanning will not
start (see Programming Scan Channels - below).
NOTE
UNIDEN UH5040R
UH5040R
17
UHF CB Transceiver