Daily Care And Maintenance - MIMAKI jv34 series Daily Maintenance

2. Daily care and maintenance

Tools required for Maintenance
Clean stiick
Cleaning Solution 200 for Solvent Ink kit
Wiper kit 33S
Surroundings of the heads ("Cleaning the Ink Head and the Area around It" Chapter 5
of the Operation Manual)
The heads and their surroundings are the parts most liable to be tainted in this machine and if tainted, it could
cause adverse effects to the functions of the machine and the results of the printings. Moreover, as the head
itself uses very fine mechanisms, sufficient precautions are required for the care and maintenances.
Maintenance
cover
Clean the side surface of the head (shown
in deep gray) with a clean stick.
The nozzle part (Never
touch it.)
Clean with a clean stick or a waste cloth.
Item Name
1
Move the carriage to the left.
• Move the carriage referring to "Cleaning the Ink Head and
2
Open the maintenance cover.
• Remove the screws and open the maintenance cover.
3
Clean the head and the surrounding area.
• Gelled ink and dust could stick under the slider and the sur-
• Scrape them off with clean stick etc. In this case, never rub
SPC-0527
SPC-0369
SPA-0134
the Area around It" Step 1, Chapter 5 of the Operation
Manual.
roundings of the head.
the nozzle portion of the head.
2
Product No.