Setting Long Time Exposure - Kodak EasyShare DX4530 User Manual

Setting Long Time Exposure

Use Long Time Exposure to control how long the shutter stays open. Settings
are: None, 0.7, 1, 1.5, 2, 3, and 4 seconds.
NOTE: Long Time Exposure cannot be used with Exposure Compensation.
1 To avoid blurry pictures, place the camera on a flat, steady surface or use a
tripod.
2 In any Still mode, press the Menu button.
3
Press
button.
Available flash settings:
Default flash setting:
Camera returns to default: When you change the mode dial or turn off
28
Chapter 2
to highlight Long Time Exposure
4
Press
5
Press the OK button to accept the change.
6 Press the Menu button to exit the menu.
7 Use the camera screen to frame your
subject. Press the Shutter button half-way
to set the focus, then continue pressing
completely down to take the picture.
This setting remains until you change the
Mode dial or turn off the camera.
Auto, Flash Off, Fill Flash, Red-eye
Off
the camera.
, then press the OK
to highlight an option.