Recording The Copy List - Pioneer XV-DVR9H Operating Instructions Manual

Copying and back-up
1 Load the recordable DVD disc that contains the
material you want to copy to the HDD.
2 With the input function set to HDD/DVD, press
HOME MENU and select 'Copy'.
Timer Recording
Disc Navigator
Copy
Disc History
PhotoViewer
• Note that the Copy option will not be available if the
TV system of the system unit and the disc do not
match. (See Input Line System on page 102 for how to
change the TV system of the system unit.)
3 Select 'DVD HDD'.
The DVD to HDD Copy screen appears.
DVD to HDD Copy
Original
DVD
1
DVD
DVD
Add
HDD HDD
Erase
Move
Preview
Copy List
Erase All
Conf List
If the Copy List is empty, the only available menu option
is Add. Use this to select titles from the DVD to add to
your Copy List.
Press ENTER to select Add. Use the
right) buttons to select a title to add to the Copy List, then
press ENTER.
Continue adding as many titles as you want. See DVD to
HDD Copy List menu options on page 72 for other Copy
List menu options.
• When in the thumbnails area of the screen, use the
PREV ( ) and NEXT (
previous/next page if there are more titles than will fit
on the screen.
• As you highlight different thumbnails, information
about the title is shown in the central area of the
screen. Press DISPLAY to change the information
displayed.
• Press RETURN to get back to the menu options on
the left from the thumbnail area of the Copy List
screen.
Disc Setup
Initial Setup
Video Adjust
Play Mode
DV Record
2 3 4
1/3
Total 0h00m 1/1
(cursor left/
) buttons to display the

Recording the Copy List

After putting together your Copy List, you're ready to
record it.
1 Select 'Conf List' to display the Copy List settings
screen.
2 Use the (cursor left/right) buttons to select
the Recording Mode.
DVD to HDD Copy
Original
DVD
DVD HDD
Recording Mode
Add
Erase
Copy List Total
Move
Current HDD Remain
Preview
Erase All
Conf List
• High-Speed Copy – Only available when copying
Original content from a VR mode disc. The Copy List
is copied at the same recording quality as the
original. (See page 60 for more information on high-
speed copying.)
• FINE, SP, LP, EP, MN – The Copy List is copied at the
specified recording quality in real-time. (Note that if
you copy at a higher quality setting than the original,
the copy will not be better quality than the original.)
• If you select MN above, you can also change the level
setting (MN1–MN32) from the Recording Quality box
that appears.
When you change the recording mode setting, you can
see how much hard disk space it will require. If this is
more than is available, it shows up in red and you won't
be able to start copying. In this case, either change the
recording quality, or press RETURN to go back to the
Copy List screen and erase one or more titles from the
Copy List.
3 Select 'Start' to begin copying.
Required 1h30m
SP
Start
1h30m
30h00m
/ 34h00m
07
71
En