Connecting An External Decoder Box (2) - Pioneer XV-DVR9H Operating Instructions Manual

Other connections

Connecting an external decoder box (2)

If you only have a decoder box, connect it to this system and your TV as shown on this page.
Using the setup on this page you can:
• Record scrambled channels received using the system's built-in TV tuner.
Important
• Do not connect this system 'through' your VCR, satellite receiver or cable box to your TV.
ANTENNA
IN
SCART AV
1 2
CONNECTOR
IN OUT
VHF/UHF ANTENNA
L
IN
OUT
AV 2 (LINE1/ DECODER)
R
ANALOG AUDIO
IN
FM UNBAL AM
75Ω LOOP
AM/FM ANTENNA
CONTROL USE ONLY WITH S-DVR727H SW
1
SCART AV
CONNECTOR
Antenna/cable TV
wall outlet
TV
AV 1 (RGB) - TV
AC IN
OUT IN
OPTICAL DIGITAL AUDIO
3
Decoder box
1 Connect RF antenna cables as shown.
This enables you to watch and record TV channels.
2 Use a SCART cable to connect the AV1(RGB)-TV
AV connector to a SCART AV connector on your TV.
This enables you to watch discs.
3 Use another SCART cable to connect the
AV2(LINE 1/DECODER) AV connector to a SCART AV
connector on your decoder box.
This enables you to record scrambled TV channels.
Note
• In order to use this setup, you will need to make the
following settings from the Initial Setup menu:
– Set the AV2/L1 In setting to Decoder from the
Initial Setup menu (see AV2/L1 In on page 106).
– From the Manual CH Setting screen, set the
Decoder setting for the scrambled channels to On
(see Manual CH Setting on page 104).
16
119
En