Pioneer XV-DVR9H Operating Instructions Manual page 50

06 Recording
7 Press ENTER to set the end time.
8 Select 'Yes' to set the timer recording and exit, or
'No' to go back to the timer recording screen.
• You can check the timer recording details you just set
from the main timer recording screen (see Standard
timer recording below).
Note
• You can't use VPS/PDC with Easy Timer Recording.
Use the standard or VIDEO Plus+ timer recording
methods if you want to use VPS/PDC.
Standard timer recording
The timer recording screen you can see all the timer
programs already set, clear programs and set up new
ones.
1 Press HDD or DVD.
2 Press HOME MENU and select 'Timer Recording'
then 'Timer Recording (View)'.
This screen shows all the timer programs currently set.
Timer Recording
Date Start
MON 13/12
EVERY TUE
HDD Remain
DVD Remain
• Each row is for one timer recording program, with the
date and time information, channel, recording mode,
DVD or HDD and the VPS/PDC setting.
• The amount of free space available on the HDD and
the currently loaded recordable DVD is shown
towards the bottom of the screen.
50
En
CLEAR
TUNE +
ST – ST +
ENTER
HOME
MENU
TUNE –
PREV NEXT
Stop CH Mode Rec to VPS/PDC
7:00 8:00 Pr 3 FINE HDD Off
9:00 10:00 Pr 5 FINE HDD On
New Input
10h20m(FINE)
0h43m(FINE)
• In the lower-right corner, the number of timer
programs already set and the number that use VPS/
PDC, is shown next to Tmr Pgms.
• If there are more than eight timer programs already
set, press NEXT
the PREV
• You can also clear a timer program before it's started
(before the recorder enters timer recording standby)
by highlighting it and pressing CLEAR.
3 Select 'New Input' to set a new timer program,
then press ENTER.
Date
Rec to
4 Enter the timer recording settings.
Use the
use the
value.
• Date – Choose a date up to one month in advance, or
select a daily or weekly program.
• Start – Set the recording start time.
• Stop – Set the recording end time (maximum length
of a timer recording is 24 hours for HDD recording or
six hours for DVD).
• CH – Choose a channel (1–99, excluding skip
channels), or one of the external inputs from which to
record.
• Mode – Select FINE, SP, LP, EP or AUTO (See
Recording time and picture quality on page 45). If
Manual Recording is on, then you can also select the
MN setting—see Manual Recording on page 110.
• Rec to – Select HDD for hard disk recording or DVD
for DVD recording. Select HDD
Recording (daily or weekly timer recording only).
• Group – Select a record group (for HDD recording
only).
• VPS/PDC – The VPS/PDC system automatically
1/1
adjusts the recording time so that even if a program
is not running to schedule you won't miss it. For VPS/
PDC to work properly, you must input the correct
announced time and date of the program you want to
record. Up to eight timer recordings can be set with
VPS/PDC on.
Note that VPS/PDC may not work with every station
and that Optimized Recording will not work if VPS/
PDC is on.
to switch page (go back using
button).
Timer Recording
Start Stop CH
12/12 SUN 10 00 -- -- Pr 7
Group VPS/PDC
HDD GROUP 1 OFF Program Set
(cursor left/right) buttons to select a field;
(cursor up/down) buttons to change the
Rec Mode
SP
Ttl Name Input
for Auto Replace