Audio In Settings - Pioneer XV-DVR9H Operating Instructions Manual

The Initial Setup menu
• Decoder – Use this setting if you are using a decoder
connected to the AV2(LINE 1/DECODER) input. (For
scrambled channels, make sure that the manual
channel Decoder setting is set to On—see also
Manual CH Setting on page 104). Note that on this
setting, it is not possible to use Auto Start Recording.
Note
• When the Input Line System setting is set to 525
System, RGB can't be selected.
• When the Input Line System setting is set to 625
System, RGB can be selected, but if the Input Line
System is then changed to 525 System, the AV2/L1
In setting automatically changes to Video.
• See also Input Line System on page 102.
NTSC on PAL TV
• Default setting: On
Initial Setup
Basic Input Colour System
Tuner AV1 Out
Video In/Out AV2/L1 In
Audio In NTSC on PAL TV
Audio Out
Language
Recording
Playback
When set to On, NTSC discs (from the U.S., for example)
will play correctly on a PAL-only TV. Change to Off if your
TV is already NTSC-compatible.
Depending on this setting and the Input Line System
setting (see Input Line System on page 102), the signal
format output when the DVD/HDD is stopped varies as
shown in the table below.
NTSC on PAL
Input Line System
TV
625 System Off
On
525 System Off
On
Note
• Many recent PAL TVs are capable of correctly
displaying NTSC pictures without the need for this
setting. Check the manual that came with your TV if
you're not sure whether yours has this feature.
On
Off
Output when
stopped
PAL
PAL
NTSC
PAL–60

Audio In settings

NICAM Select
• Default setting: NICAM
Initial Setup
Basic NICAM Select
Tuner Tuner Level
Video In/Out External Audio
Audio In Bilingual Recording
Audio Out DV Input
Language Input Level (L1)
Recording Input Level (L2)
Playback
If you want to record the non-NICAM audio in a TV
broadcast, select Regular Audio, otherwise set to
NICAM. (When set to NICAM, you can still select
Regular Audio using the AUDIO button. See Changing
audio channels on page 22.)
Tuner Level
• Default setting: Normal
Initial Setup
Basic NICAM Select
Tuner Tuner Level
Video In/Out External Audio
Audio In Bilingual Recording
Audio Out DV Input
Language Input Level (L1)
Recording Input Level (L2)
Playback
Set to Compression if the audio level from the built-in TV
tuner is excessively high causing distortion.
External Audio
• Default setting: Stereo
Initial Setup
Basic NICAM Select
Tuner Tuner Level
Video In/Out External Audio
Audio In Bilingual Recording
Audio Out DV Input
Language Input Level (L1)
Recording Input Level (L2)
Playback
If the external source is standard stereo, leave set to
Stereo. If each channel carries a separate soundtrack,
change to Bilingual.
When the external audio is from the DV input, an audio
subcode channel within the DV audio tells the system
whether the audio is stereo or bilingual. This has priority
over the setting you make here.
NICAM
Regular Audio
Normal
Compression
Stereo
Bilingual
15
107
En