Setting The Picture Quality For Disc Playback - Pioneer XV-DVR9H Operating Instructions Manual

The Video Adjust menu
• White Level – Adjusts the intensity of white.
• Black Level – Adjusts the intensity of black.
• Black Setup – Corrects the standard reference black
level (NTSC video only).
• Hue – Adjusts overall balance between red and
green.
• Chroma Level – Adjusts how rich the colours
appear.
4 Use the (cursor left/right) buttons to adjust
the currently selected picture quality setting.
5 When you have all the settings as you want
them, press HOME MENU to exit.
You can now use the preset for any other input or the
built-in TV tuner.
Tip
• To see more of the picture as you adjust different
settings, press ENTER after selecting the setting you
want to adjust.
Note
• When the DV input is selected, only VNR and Detail
settings can be adjusted.
• When White AGC is On, the White Level setting
can't be adjusted.
• The 3-D Y/C and Black Setup settings apply only to
NTSC video input.
Setting the picture quality for disc
playback
This setting determines how the picture will look when
playing discs.
Choosing a preset
1 With a disc playing (or paused), press HOME
MENU and select 'Video Adjust'.
2 Use the (cursor left/right) buttons to
change the setting.
TV(CRT)
Detailed Settings
There are six presets available:
• TV(CRT) – suitable for standard cathode-ray tube TVs
• PDP – suitable for plasma display screens
• Professional – suitable for professional monitors
• Memory1 – user preset 1
• Memory2 – user preset 2
• Memory3 – user preset 3
You can press DISPLAY to see the individual settings for
the current preset (TV(CRT), PDP or Professional).
3 Press ENTER to select the preset.
Creating your own set
There are three user presets in which you can save your
own set of picture quality settings for disc playback.
1 Follow Choosing a preset above and select one of
the user presets (Memory 1, 2 or 3).
2 Move the cursor down and select 'Detailed
Settings'.
Memory1
Detailed Settings
3 Select the picture quality setting you want to
adjust.
Memory1
YNR
CNR
QNR
Detail
White Level
Black Level
Black Setup
You can adjust the following settings:
• YNR – Adjusts the amount of noise reduction (NR)
applied to the Y (brightness) component.
• CNR – Adjusts the amount of noise reduction (NR)
applied to the C (colour) component.
• QNR – Adjusts the amount of noise reduction (NR)
applied to the block noise.
• Detail – Adjusts how sharp edges appear.
• White Level – Adjusts the intensity of white.
• Black Level – Adjusts the intensity of black.
Off Max
Off Max
Off Max
Off Max
Min Max
Min Max
0 IRE
14
99
En