Other Connections; Connecting Auxiliary Components; Recording Mode - Pioneer XV-DV333 Operating Instructions Manual

Other connections

Chapter 9
Other connections
Connecting auxiliary
components
This system has both stereo analog inputs and
outputs, as well as a optical digital input. Use
these to connect external components, such
as your VCR, MD or CD-R recorder.
Tape deck, etc.
AUDIO
OUTPUT
XV-DV333/340
MCACC
6
6 MIC
FRONT CENTER
SPEAKERS
6
L L
AUDIO
6
R R
6 6
SURROUND
SUB
WOOFER
• Connect the LINE 1 (IN) jacks to the analog
outputs of an external playback component.
These include components such as a VCR,
cassette deck or your TV. Connect using RCA
pin-plug stereo cables.
• Connect the LINE 1 (OUT) jacks to the
analog inputs of an external recording
component.
These include components such as a cassette
deck, VCR, MD, or another recorder with
analog inputs. Connect using RCA pin-plug
stereo cables.
Note
1 • When Recording mode is on, most sound features cannot be used. The display will briefly blink RMode On if you try and
use a prohibited function while Recording mode is on.
• When Recording mode is off, the audio from the analog output may be interrupted, depending on the operation.
• The Recording mode switches off if you change the input function (DVD (CD), TUNER, etc.) or switch the power off.
AUDIO
INPUT
IN OUT
LINE 1
• Connect the LINE 2 (OPTICAL IN) jack on
the rear panel to the optical digital output of
an external playback component.
These include digital components such as an
MD player, digital satellite, or a game system.
Connect using an optical digital cable.

Recording mode

The Recording mode allows you to make
surround-compatible analog recordings from
the LINE 1 (OUT) jacks.
sources will be downmixed to stereo for
improved playback with systems that can
provide matrix-decoding (like Dolby Pro Logic).
1 Press SOUND .
2 Use to select 'RecMode?' then press
ENTER .
3 Use to select 'RMode On' or
'RModeOff' then press ENTER to confirm.
• RMode On – A surround-compatible
downmix (left-total/right-total, or Lt/Rt) of
Dolby multichannel sources is output,
(suitable for Dolby Surround Pro Logic or
other matrix decoding).
• RModeOff – A simple stereo downmix
(left-only/right-only, or Lo/Ro) is output
(suitable for playback on a two-channel
stereo system or on headphones).
1
Dolby multichannel
09
29
En