Pioneer XV-DVR9H Operating Instructions Manual page 24

03 Getting started
1 Press STANDBY/ON to switch on.
Also turn on your TV and make sure that it is set to the
correct video input.
2 Press HDD to playback from the HDD, or DVD to
play a DVD.
If playing video from the HDD, skip to step 5 below.
3 Press OPEN/CLOSE (front panel only) to open
the disc tray.
4 Load a disc.
Load a disc with the label side facing up, using the disc
tray guide to align the disc (if you're loading a double-
sided DVD-Video disc, load it with the side you want to
play face down).
24
En
STANDBY/ON
HDD DVD
CLEAR
DVD MENU
TUNE +
TOP MENU
ST – ST +
ENTER
RETURN
TUNE –
REV SCAN PLAY FWD SCAN
PAUSE STOP CM
BACK SKIP
PREV NEXT STEP/SLOW
5 Press PLAY to start playback.
• If you're playing a DVD-Video or Video CD, a disc
menu may appear when you start playback. Use the
(cursor) buttons and ENTER to navigate
DVD disc menus, and the number buttons and
ENTER for Video CD menus.
• When playing video from the HDD, playback will
automatically stop after the end of a title is reached.
• See the following sections for more details on playing
specific kinds of discs.
6 To stop playback, press
• You can resume playback of a DVD disc from this
point if you don't switch the system into standby (you
can switch to the FM/AM radio tuner without losing
the resume point).
• Note that if you switch the input function (to FM/AM
for example), playback will automatically stop.
7 When you've finished using the system, eject the
disc and switch the system back into standby.
• To open/close the disc tray, press
the front panel. Remove the disc before putting the
system into standby.
STANDBY/ON to switch the system into
• Press
standby.
STOP.
OPEN/CLOSE on