Table of Contents

Advertisement

RELIANCE L-861T Elevated Taxiway Edge LED (ETES) Light
User Manual
96A0321, Rev. Q, 2021/06/09

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RELIANCE L-861T and is the answer not in the manual?

Questions and answers

Summary of Contents for ADB Safegate RELIANCE L-861T

  • Page 1 RELIANCE L-861T Elevated Taxiway Edge LED (ETES) Light User Manual 96A0321, Rev. Q, 2021/06/09...
  • Page 3 Material Handling Precautions and Storage precautions that must be followed. ADB SAFEGATE reserves the right to examine goods upon which a claim is made. Said goods must be presented in the same condition as when the defect therein was discovered. ADB SAFEGATE furthers reserves the right to require the return of such goods to establish any claim.
  • Page 4 This manual could contain technical inaccuracies or typographical errors. ADB SAFEGATE BV reserves the right to revise this manual from time to time in the contents thereof without obligation of ADB SAFEGATE BV to notify any person of such revision or change. Details and values given in this manual are average values and have been compiled with care. They are not binding, however, and ADB SAFEGATE BV disclaims any liability for damages or detriments suffered as a result of reliance on the information given herein or the use of products, processes or equipment to which this manual refers.
  • Page 5: Table Of Contents

    1.1.4 Operation Safety ......................................3 1.1.5 Maintenance Safety ..................................... 3 1.1.6 Material Handling Precautions, ESD ..............................4 2.0 RELIANCE L-861T Elevated Taxiway Edge LED (ETES) Light ....................5 2.1 About this manual ........................................5 2.2 How to work with the manual ....................................5 3.0 RELIANCE ETES-L Introduction .............................
  • Page 6 TABLE OF CONTENTS Copyright ADB Safegate, All Rights Reserved ©...
  • Page 7 Figure 9: ETES LED Retro Fit Chart to Rev J and After 1/15/08 ..........................26 Figure 10: ETES LED Retro Fit Chart Prior to 1/15/08 Rev J ............................ 27 96A0321, Rev. Q, 2021/06/09 Copyright ADB Safegate, All Rights Reserved ©...
  • Page 8 List of Figures viii Copyright ADB Safegate, All Rights Reserved ©...
  • Page 9 Table 2: Main Components Parts Not Shown List ..............................23 Table 3: ETES Replacement Chart For ETES/XXXX REV J CHANGE ........................27 Table 4: Replacement Kits ........................................28 Table 5: ETES-L Spare Parts ......................................... 29 96A0321, Rev. Q, 2021/06/09 Copyright ADB Safegate, All Rights Reserved ©...
  • Page 10 List of Tables Copyright ADB Safegate, All Rights Reserved ©...
  • Page 11: Safety

    1.0 Safety Introduction to Safety This section contains general safety instructions for installing and using ADB SAFEGATE equipment. Some safety instructions may not apply to the equipment in this manual. Task- and equipment-specific warnings are included in other sections of this manual where appropriate.
  • Page 12: Introduction To Safety

    Using this equipment in ways other than described in this manual may result in personal injury, death or property and equipment damage. Use this equipment only as described in this manual. Failure to follow this instruction can result in serious injury or equipment damage Copyright ADB Safegate, All Rights Reserved ©...
  • Page 13: Material Handling Precautions: Storage

    Allow only qualified personnel to make repairs. Repair or replace the malfunctioning component according to instructions provided in its manual. Failure to follow these instructions can result in death or equipment damage 96A0321, Rev. Q, 2021/06/09 Copyright ADB Safegate, All Rights Reserved ©...
  • Page 14: Material Handling Precautions, Esd

    • The tip of the soldering iron must be grounded. • Electronic modules and components must be stored and transported in conductive packing. Failure to follow this instruction can result in equipment damage Copyright ADB Safegate, All Rights Reserved ©...
  • Page 15: Reliance L-861T Elevated Taxiway Edge Led (Etes) Light

    2.0 RELIANCE L-861T Elevated Taxiway Edge LED (ETES) Light The RELIANCE ETES-L LED elevated light fixture is used to define the edges of airport taxiways and has an average LED life of 100,000 hours under high-intensity conditions and more than 180,000 hours under typical operating conditions, resulting in significant reduction or even elimination of ongoing maintenance costs and periodic re-lamping expenses.
  • Page 16 RELIANCE L-861T Elevated Taxiway Edge LED (ETES) Light Copyright ADB Safegate, All Rights Reserved ©...
  • Page 17: Reliance Etes-L Introduction

    3.0 RELIANCE ETES-L Introduction Figure 3. This section describes the ADB SAFEGATE RELIANCE L-861T elevated taxiway edge LED (ETES) light. Figure 4 for the main items in the assembly. Typical installation is on a L-867 light base. The housing assembly includes the electronic package.
  • Page 18 RELIANCE ETES-L Introduction Copyright ADB Safegate, All Rights Reserved ©...
  • Page 19: Reliance Etes Installation

    Closer spacing of the lights should be provided on short taxiway sections, curves, and entrances to taxiways from runways or aprons. 4.4 Installation Procedures This subsection provides installation instructions for the L-861T light fixtures. 96A0321, Rev. Q, 2021/06/09 Copyright ADB Safegate, All Rights Reserved ©...
  • Page 20: Base Mounting

    2) from the light fixture to the female plug on the secondary lead of the isolation transformer by first loosening the frangible coupling hex screw ( Figure 2) until the coupling is free. Then retighten the hex screw finger-tight. Copyright ADB Safegate, All Rights Reserved ©...
  • Page 21: Light Fixture Leveling

    2" PVC CONDUIT ISOLATION TRANSFORMER SIZE AS REQ'D. TRANSFORMER SUPPORT (TYP.) 1 PIECE L868B BASE INSTALLATION 4.4.3 Light Fixture Leveling Level the light fixture only after mounting it on the base. 96A0321, Rev. Q, 2021/06/09 Copyright ADB Safegate, All Rights Reserved ©...
  • Page 22: Stake Mounting

    1/4 - 20 x 3/4-in. hex head screw and 1/4-in. split lock washer. Copyright ADB Safegate, All Rights Reserved ©...
  • Page 23 6. The small hole at the lower end of the stake is provided for a counterpoise wire connection. 7. Install the light fixture on the stake. 96A0321, Rev. Q, 2021/06/09 Copyright ADB Safegate, All Rights Reserved ©...
  • Page 24 RELIANCE ETES Installation Copyright ADB Safegate, All Rights Reserved ©...
  • Page 25: Maintenance Introduction

    Apply a light coat of anti-seize compound on the locking ring threads to make assembly and disassembly easier. • Insert the cord through the column and the frangible coupling and secure both with the hex screws. See LED and Arctic Kit or Electronic Module Replacement. 96A0321, Rev. Q, 2021/06/09 Copyright ADB Safegate, All Rights Reserved ©...
  • Page 26 Maintenance Introduction Copyright ADB Safegate, All Rights Reserved ©...
  • Page 27: Troubleshooting

    When servicing the internal components do not loosen and remove the screws that hold the glassware in place. To remove the glassware assembly simply grasp the collar below the glassware and turn counter clockwise and unscrew the assembly off of the housing. 96A0321, Rev. Q, 2021/06/09 Copyright ADB Safegate, All Rights Reserved ©...
  • Page 28: Access To Internal Components

    If the electronic module must be removed/replaced proceed as follows: Remove LED components as described above then locate and remove the two screws attaching the electronic module to the housing and remove the electronic module Copyright ADB Safegate, All Rights Reserved ©...
  • Page 29: Cord Set Replacement

    6.2.4 Glassware and Gasket Seal Replacement • All items in the Glassware Assembly is replaceable. ADB Safegate recommends that if the glass is broken replace both gaskets along with the new glassware. If gaskets are leaking replace both gaskets. •...
  • Page 30 Troubleshooting Copyright ADB Safegate, All Rights Reserved ©...
  • Page 31: Reliance Etes Parts

    7.0 RELIANCE ETES Parts To order parts, call ADB SAFEGATE Customer Service or your local representative. Use this four-column parts list, and the accompanying illustration, to describe and locate parts correctly. Figure 3: RELIANCE ETES Assembly Ordering Code ETES - X X X X...
  • Page 32: Figure 4: L-861T Etes Fixture (Part 1 Of 2)

    62A0007-19 COLUMN FOR 30" 62A2209 COUPLING 1-1/2"X 2" FRANGIBLE SLOT 62B0461/SPARE COUPLING 1 1/2" W/ SLOTTED BASE 62B0073/SPARE COUPLING 1 1/2" W/ HX HD SCREW 61A0281/SPARE COUPLING FRNG REDUC 2"-1" G2- 22 11tpi Copyright ADB Safegate, All Rights Reserved ©...
  • Page 33: Figure 6: L-861T Etes Fixture And L-861T Etes (Without Heater)

    MIN LG WIRES MUST BE TIGHT TOGETHER DETAIL A SECTION A-A Table 2: Main Components Parts Not Shown List Part Number Description 67A0033 Thermal Joint Compound 67A0048 Anti-seize compound 96A0321, Rev. Q, 2021/06/09 Copyright ADB Safegate, All Rights Reserved ©...
  • Page 34: Figure 7: L-861T Etes (With Heater)

    CUT TO 14.25" LONG 3/8 SS FLAT WASHER 66A0015/29 WIRE TIE .19W X .045T X 2 MIN LG ETES WIRE TIE WIRES MUST BE TIGHT TOGETHER DRAWING NUMBER : REV. ETES XXXX AJ-02 Copyright ADB Safegate, All Rights Reserved ©...
  • Page 35: L-861T Optional Stake Assembly Parts List

    See Figure 9. The optional stake assembly part number is 44B0348. Figure 8: Stake Assembly 7.2 Optional Parts Refer below for optional parts. Part Number Description 1935 12-inch-diameter base plate, 1.5-12 UNF tap (Supplied with gasket.) 96A0321, Rev. Q, 2021/06/09 Copyright ADB Safegate, All Rights Reserved ©...
  • Page 36: Retrofit Charts

    IR WILL REMAIN ACTIVE - 44A6606/ IR CAN ONLY BE REPLACED WITH 44A6606/ CHANGE RECORD PREVIOUS NUMBER NEW NUMBER ECO DATE 44A6662/010E 44A7163/010E 3265 / 18 44A6662/110E 44A7163/110E 3265 / 18 AFTER 1/15/08 ( Copyright ADB Safegate, All Rights Reserved ©...
  • Page 37: Led Replacement Charts

    44A6606 + 94A0505 44A7163/010E + BLUE 60HZ NO 94A0523 94A0525/XX + 44A6639 /1X11 44A6332/60 44A6331/11 1W 44A6606 44A7163/110E 1W 44A6606 + 44A7163/110E + BLUE 60HZ ARC 94A0505/1 + 94A0523/1 94A0525/XX 96A0321, Rev. Q, 2021/06/09 Copyright ADB Safegate, All Rights Reserved ©...
  • Page 38: Table 4: Replacement Kits

    Second generation 5W LED Module and 5W PCB Power Supply are no longer available and must be replaced. 5W assemblies: 44A6332/60/5 - 5W PCB Power Supply 44A6331/11/5W - 5W LED Module with Heater Copyright ADB Safegate, All Rights Reserved ©...
  • Page 39: Reliance Etes Spare Parts

    Lens assembly, blue (UV-resist. polycarbonate) 44A6334-6 Terminal, 90º, for cord set 70A0714 PCB ASSY, ETES LED PS 50/60HZ, W/ BRKT 44A7475-1 * Slot across threaded end allows easy replacement of broken frangible coupling 96A0321, Rev. Q, 2021/06/09 Copyright ADB Safegate, All Rights Reserved ©...
  • Page 40 RELIANCE ETES Parts Copyright ADB Safegate, All Rights Reserved ©...
  • Page 41: Support

    A.2.1 Local Authority Recycling The disposal of ADB SAFEGATE products is to be made at an applicable collection point for the recycling of electrical and electronic equipment. The correct disposal of equipment prevents any potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling.
  • Page 42: Adb Safegate Recycling

    Main Unit Serial Number. ADB SAFEGATE will continue to monitor and update according for any future requirements for EU directives as and when EU member states implement new regulations and or amendments. It is our aim to maintain our compliance plan and assist our customers.
  • Page 43 Tel.: +46 (0)40 699 17 00, Internet: www.adbsafegate.com Fax: +46 (0)40 699 17 30 ADB SAFEGATE Airfield Technologies Ltd. China ADB SAFEGATE, China: Unit 603, D Block, CAMIC International Convention Center, No 3, Hua Jia Di East road, ChaoYang district, Beijing 100102 P.R.

Table of Contents