C–2
Model 2100 and 2200 Ultra SCSI Controller Enclosures User Guide
Removing Elements
Refer to the procedures listed in Table C–1 to remove each element. Do not remove the
I/O modules.
Element to Remove...
EMU
Power supply
ECB
Fan
Installing the Enclosure
After removing the elements listed in Table C–1, install the empty enclosure using rack
documentation. Then return to this document and continue with the assembly instructions
contained in the following sections.
Installing Enclosure-Front Elements
Four types of elements are installed in the enclosure front—the EMU, ECB, and fans (see
Figure C–1).
1
1
Figure C–1. Enclosure-front element locations
Table C–1 Procedural References for Removing Elements
2
2
2
1
1
Go to Procedural Reference...
Table 8–2 on page 5
Table 8–6 on page 8
Table 8–10 on page 14
Table 8–11 on page 15
1
ECBs
2
3
Fans
3
EMU
CXO6323C