Table of Contents
Advertisement
1.
Determine the specific fan to remove (see Figure 8–1).
2.
Push up on the release tab and lower the lever.
3.
Remove the fan from the enclosure.
1.
Press the release tab and pivot the lever.
2.
Insert the fan until its lever engages the enclosure.
3.
Lift the lever upward until the lever locks.
4.
If enclosure power is applied, verify that the fan power status LED
turned O
.
N
Removal and Installation Procedures
Table 8–11 Removing a Fan
Table 8–12 Installing a Fan
8–15
1
1
2
3
CXO6358A
Advertisement
Table of Contents
