Table of Contents
Advertisement
8–14
Model 2100 and 2200 Ultra SCSI Controller Enclosures User Guide
1.
Determine the specific ECB to remove.
2.
Press the release tab and pivot the lever.
3.
Remove the ECB from the enclosure.
4.
Install a blank panel in the vacant ECB bay.
Fan
Fans are hot-pluggable. See Figure 8–9 as needed during the removal and installation.
Complete the procedure in Table 8–11 to remove a fan. Complete the procedure in
Table 8–12 to install a fan.
Figure 8–9. Fan removal and installation
Table 8–10 Removing an ECB
CAUTION: Operating the enclosure with one fan removed significantly alters the
normal air flow pattern and reduces air flow through remaining elements. Install a
blank bezel to control air flow.
With two fans removed, an overtemperature condition will develop unless a second
operational fan is installed.
CXO6923B
Advertisement
Table of Contents
