Power up the MAMMOMAT
Mains voltage
WARNING
The mains input can be either 1-phase or 2-phase, 50 or 60 Hz.
Electrical power to mains input:
Mains voltage
Mains Frequency: 50 or 60 Hz
Maximum load:
Fuse:
Siemens AG
Medical Solutions
Before the power for the MAMMOMAT is turned on, make sure that
the cable plugs (left and right of the system) for the magnification
table are not shorted.
1-phase:
or
2-phase:
10kVA (momentary) and 0.8 kVA (long time load).
25 A (external) 208 -> 400 V.
SPB7-250.815.06.02.02
12.05
208, 230, 240 and 277 V ±10%
208, 230, 240, 277 and 400 V ±10%
Page 19 of 116
CS SD 24
19
MAMMOMAT Novation DR
0
0