Table of Contents
Advertisement
Intel® RAID Adapters RS3P4TF160F and RS3P4MF088F Hardware User Guide
6.1
Intel® RAID Adapter Installation
6.1.1
Requirements
The following items are required to install an Intel RAID adapter:
•
Intel RAID adapter
•
Server system based on an Intel server board with support for an Intel RAID adapter
•
Internal SAS / SATA / NVMe data cables
•
SAS drives or SATA drives
6.1.2
Packing List
1. Intel
RAID adapter
2.
Low profile mounting bracket
3. Attention document
Note: Intel RAID products do not include SAS / SATA / NVMe data cables. Appropriate data cables may be
included with the server system or must be purchased separately.
6.1.3
Installation Instructions
The Intel RAID adapters can be installed on many different systems. The following instructions show how to
install an Intel RAID adapter on an Intel® Server System M50CYP2UR.
1. Unpack the Intel RAID adapter. Inspect it for damage. If it appears damaged, contact the
corresponding Intel Customer and Technical Support representative.
2. Turn off the power to the computer and disconnect the AC power cord.
3. Remove the computer cover. Refer to the system documentation for instructions.
4. Remove the riser card assembly (the adapter can be installed on any riser card assembly).
A. Loosen the screws.
B. Pull up the riser bracket.
Figure 12. RAID Adapter Card Installation (Riser Card Assembly Removal)
32
Advertisement
Table of Contents
