Safety Characteristics; Tri-Mode Intel® Raid Adapters Feature Set; Table 1. Tri-Mode Intel® Raid Adapter Feature Set - Intel RS3P4TF160F Hardware User's Manual

Raid adapters
Table of Contents

Advertisement

Intel® RAID Adapters RS3P4TF160F and RS3P4MF088F Hardware User Guide
3.5

Safety Characteristics

All the tri-mode Intel RAID adapters meet or exceed the requirements of UL flammability rating 94 V0. Each
baseboard is also marked with the supplier's name or trademark, type, and UL flammability rating.
3.6
Tri-Mode Intel® RAID Adapters Feature Set
The following table describes the feature set of the tri-mode Intel RAID adapters.
I/O processor
RAID levels
JBOD mode or pass-thru mode (SAS / SATA)
Cache memory
Form factor
Drive interface connectors
PCI Express* interface
Data transfer rates
Maximum operating temperature
(chassis internal)
Operating system
Drive types
Maximum direct-attach NVMe* drives supported
Maximum NVMe* drives supported through switches
Maximum SAS / SATA devices supported
Maximum virtual drives
Advanced array configuration and management utilities
Support for global hot spares and dedicated hot spares
Support for user-defined strip sizes: 64, 128, 256, 512, or 1024 KB
Advanced array configuration and management utilities offer
these capabilities:
• Online capacity expansion
• Online RAID level migration
• Drive migration
• Drive roaming
• No reboot necessary after expansion
• Media scan
User-specified rebuild rate (specifying the percentage of system
resources to use from 0% to 100%)
Non-volatile random access memory (NVRAM) of 32 KB for storing
RAID system configuration information; the MegaRAID* SAS
firmware is stored in flash ROM for easy upgrade.
Support for Intel® RAID Maintenance Free Backup Unit (RMFBU).
Used to save RAID cache if an unexpected power loss occurs.
Self-encrypting drive support, SAS and SATA
Self-encrypting drive support, NVMe*
SSD cache support
14
Table 1. Tri-Mode Intel® RAID Adapter Feature Set
Feature
2
1
Intel® RAID Adapter
RS3P4TF160F
Broadcom* SAS3916 PCIe
RAID on-Chip (ROC)
0, 1, 5, 6, 10, 50, 60
Yes
8 GB DDR4 at 2133 MHz
MD2 (PCIe card)
2 internal SFF-8654 female
(SlimSAS* 8i)
x8 PCIe 4.0.
PCIe performance up to 16
GT/s per lane.
12, 6, and 3 Gbps per port
SAS, 6 and 3 Gbps per port
SATA and 16 Gbps per lane
NVMe
55 °C
Microsoft Windows*, Linux*
(SUSE*, Red Hat*)
SAS, SATA, NVMe
4
24
240
64
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Intel accessory AXXRMFBU7
(option)
TCG Enterprise only
TCG Enterprise and OPAL
No
Intel® RAID Adapter
RS3P4MF088F
Broadcom SAS3916 PCIe
RAID On-Chip (ROC)
0, 1, 5, 6, 10, 50, 60
Yes
8 GB DDR4 at 2133 MHz
MD2 (PCIe card)
1 internal SFF-8654 female
(SlimSAS 8i),
2 external SFF-8644 female
x8 PCIe 4.0.
PCIe performance up to 16
GT/s per lane.
12, 6, and 3 Gbps per port
SAS, 6 and 3 Gbps per port
SATA and 16 Gbps per lane
NVMe
55 °C
Microsoft Windows, Linux
(SUSE, Red Hat)
SAS, SATA, NVMe
0
3
24
240
64
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Intel accessory AXXRMFBU7
(option)
TCG Enterprise only
TCG Enterprise and OPAL
No

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rs3p4mf088f

Table of Contents