Installation Steps - Intel WPC2011BWW Quick Installation Manual

Installation Steps

Step 1: Read About the Installation
Installing an Intel® PRO/Wireless 2011B LAN Adapter is part
of the bigger process of installing a wireless LAN (WLAN).
The steps in this guide are for installing the adapter only.
It is likely that part of the wireless network is already installed.
If you are not sure, ask your network administrator.
If the wireless networks uses access points, these access points
are probably installed and you simply install the adapter.
Continue with step 2 in this guide.
If you are setting up your computer to communicate with other
computers in a peer-to-peer network, check to see if the other
computers are already set up to communicate in a peer-to-peer
network. If so, note the SSID, channel, and encryption keys the
computers are using before continuing with step 2.
The Steps Outlined
Step 2: Attach regulatory compliance labels.
Step 3: Install the hardware for the Intel® PRO/Wireless
2011B LAN Adapter. This adapter is most likely a PC card.
Step 4: Install the driver software.
Step 5: Install the Intel® PRO/Wireless 2011B LAN Software.
Step 6: Configure the adapter.
Step 7: Make sure that the adapter is installed correctly.
For steps 2 through 7, read the subsection entitled "Before You
Start." Failure to read this subsection could result in the adapter
not functioning in the network.
To install the Intel® PRO/Wireless 2011B LAN Adapter, you
must log onto a computer with an administrative account. If
you log onto the computer with an account that does not have
administrative privileges, the installation fails.
Intel® PRO/Wireless 2011B LAN Adapter Quick Installation Guide 1