Intel Raid Adapter Rmsp3Td160F Electrical, Thermal And Atmospheric Requirements; Intel Raid Adapter Rmsp3Td160F Power Consumption - Intel RSP3TD160 Hardware User's Manual

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide
3.2.1

Intel RAID Adapter RMSP3TD160F Electrical, Thermal and Atmospheric Requirements.

List of operating conditions for the Intel® RAID adapter RMSP3TD160F:
Power Supply voltage at the 12V rail (from PCI edge connector): 12V ± 8 percent.
•
Power Supply voltage at the 3.3V rail (from PCI edge connector): 13.3V ± 9 percent.
•
• Relative humidity range is 20 percent to 80 percent non-condensing
Temperature range: 10 °C to +55 °C (with or without the RMFBU module attached)
•
List of non-operating conditions (while in storage or in transit) for the Intel® RAID adapter
RMSP3AD160F:
Relative humidity range is 5 percent to 90 percent non-condensing.
•
• Temperature range: –40°C to +70°C without battery backup unit
Temperature range: 0°C to +45°C with battery backup unit
•
3.2.2

Intel RAID Adapter RMSP3TD160F Power Consumption.

The following table describes the power consumption of the Intel® RAID adapter
RMSP3AD160Funder the following states:
State 1: While sitting idle at the DOS prompt or the EFI shell.
State 2: During a drive stress test; average over 20 minutes of sustained operation
Power Mode
3.3V Supply
+ 12 Supply
3.3V Auxillary Supply
Total Power
State 1
Typical
0.24W
16.4W
0.03W
16.64W
State 2
Typical
0.28W
16.7W
0.08W
17.02W
RMFBU learn
6W
6W
18