T U N I N G T H E F R A M E
A.
Open the frame latch handle. Using a 2.5mm allen wrench,
loosen the set screw located on the underside of the latch pin.
B.
Adjust the length of the latch screw using a 3mm allen wrench.
Rotate the screw clockwise to decrease the latching force.
Rotate the screw counterclockwise to increase the latching
force.
C.
Close the frame latch handle and ensure the handle fully closes
tightly against the frame. Check to make sure the frame feels
rigid. Retighten the set screw on the underside of the latch pin
using a 2.5mm allen wrench.
A
C
30
B