Radio Flyer FLYER FOLDING CARGO Owner's Manual page 25

Charging the Battery
The Flight Speed
TM
from the bike frame. Before charging, ensure the battery is off by powering off the display
as described in the "Handlebar Display" section above.
A. If removing the battery to charge, lay it down on a stable flat surface.
B. Remove the rubber cover to reveal the battery charging port.
C. Plug the charger into the battery charging port. Push the charger plug firmly into
the charging port.
D. Plug the charger into a power outlet. Only connect your charger to an outlet with a
rated voltage of 110-220VAC. The LED in the charger housing will turn red to indicate
the charger is connected properly.
E. Once the charger LED turns green (indicating the battery is fully charged), unplug
the charger from the power outlet.
F. Unplug the charger plug from the charging port and replace the rubber cover.
A
D
battery can be charged while installed in the bike or when removed
B
E
C
F
25