Radio Flyer FLYER FOLDING CARGO Owner's Manual page 24

Install Bluetooth Tag (optional)
The bike includes a holder that can house one Bluetooth location tag as a security
feature. The tag must be purchased separately and activated prior to installation.
For a list of compatible tags, visit flyer.radioflyer.com or contact customerservice@
radioflyer.com
You can access the Bluetooth tag holder by removing the battery and locating the tag
pocket on the dock. Push down on the tag device until you hear a click. Some Bluetooth
tags require an adhesive tape to fit securely in the pocket.
Checking Battery Charge Level
In addition to the main display, the battery charge level can also be checked directly
on the battery. Before checking the fuel gauge, remove the battery following the steps
outlined in the "Removing the Battery" section.
A. Locate the battery fuel gauge at the top of the battery.
B. Push the button on the battery fuel gauge. Fuel gauge LEDs will light up
corresponding to the level of charge in the battery pack.
A B
24