Radio Flyer FLYER FOLDING CARGO Owner's Manual page 28

Stem
Seat
Handlebar
Chain
Bearings
Cranks & Pedals
Frame & Fork
Motor Drive
Assembly &
Throttle
Battery
Control Cables
Accessories
Reflectors
28
• Ensure the stem is securely connected to the eBike and the stem cannot
be moved.
• Confirm the adjustment lever is fully tightened and locked.
• Verify the stem is properly adjusted to fit your height.
• Ensure the seat is securely connected to the eBike and the seat cannot be
moved.
• Confirm the adjustment lever is fully tightened and locked.
• Verify the seat is properly adjusted to fit your height.
• Confirm that the seat is securely fastened to the post (torque: 10 Nm).
• Confirm the handlebar always aligns with fork when moving in desired
direction and both parts turn in unison.
• Secure the front wheel or fork, preventing it from turning. Apply
approximately 20 lbs of force to one of the handlebar grips. The
handlebar should not rotate independently from the front wheel or fork.
• Confirm the stem clamp bolts are tightened to 6 Nm and the stem
faceplate bolts are tightened to 6 to 8 Nm.
• Ensure the chain is properly lubricated and runs smoothly.
• After using in rough weather conditions such as rain, snow, or other severe
weather, verify that chain and links are clean and undamaged.
• Verify all bearings are lubricated and run smoothly with no unnatural
sounds such as grinding or rattling.
• Check the bearings in the headset assembly, pedals and bottom bracket,
and the rear wheel.
• Confirm pedals are tightly secured to the cranks (torque: 35Nm)
and the crank is tightly secured to the bottom bracket spindle
(torque: 40Nm).
• Verify cranks are parallel to the downtube and not bent.
• Confirm there is no damage or bending to the front fork and frame and
that fork is parallel with the front tire.
• Confirm that none of the spokes securing the hub motor are broken or loose.
• Verify that the brake disc is secured to the hub motor and all screws are tight.
• Turn on display before ride to confirm all features are working correctly.
• Ensure the throttle functions properly.
• Always charge the battery before each use.
• Confirm there is no damage to the battery.
• Ensure the battery is always securely locked to the frame with the keys
removed.
• Confirm all cables are routed away from moving parts and allow the
headset to rotate freely.
• Confirm cables, housings, and electrical connectors are undamaged and
free of debris and liquids.
• Verify the headlight, taillight, and brake light are connected and
functioning properly.
• Ensure that any loads or accessories do not interfere with moving parts.
• Tighten and secure all accessories and accessory components.
• Ensure rider is wearing a helmet and the helmet is not damaged.
• Verify reflectors are adjusted and outward facing before all rides.
• Ensure that loads or accessories do not interfere with reflectors.