Flight Speed Battery - Radio Flyer FLYER FOLDING CARGO Owner's Manual

Removing the Battery
Note: The battery should only be removed when the bike is stationary and powered off.
Failure to do so could result in damage to the battery or electrical system of the bike.
A. Insert the provided key into the battery lock. If you own multiple Flyer™ bikes,
please ensure the 4-digit codes on the key and lock are matching.
B. Turn the key clockwise to release the battery latch.
C. Remove the battery by sliding it vertically first, then diagonally towards the gap in
front of the rear rack.
A
Installing the Battery
A. Slide the battery down through the gap in front of the rear rack. Ensure that the
ledges on the back of the battery pack align with the hooks on the dock. Use the
guide arrows on the side of the battery to align it with the frame (Note: raise the
seat position for better access to the battery)
B. Push the battery down until you hear a click. Check to make sure the bottom of the
battery sits flush against the battery dock.
A
WARNING! Always lock the battery in place before riding. Failure to lock the battery could
cause damage to the bike.
B
B
C
23