Radio Flyer FLYER FOLDING CARGO Owner's Manual page 18

F O L D I N G T H E B I K E F R A M E
Note: Ensure the bike is on flat ground and the kickstand is deployed before folding. Remove any
accessories attached to the bike that could inhibit the folding.
A. Slide the round switch on the frame folding latch.
B. While holding the round switch, swing the frame folding latch open.
C. Rotate the front frame 180 degrees, and make sure the front wheel rotates 180
degrees with the front frame.
D. Slide the round switch on the stem folding latch located on the handlebar stem.
E. While holding the round switch, swing the stem folding latch open.
F. Rotate the stem 180 degrees.
G. Unhook the rubber latch located under the rear rack. Secure the bike by wrapping
the rubber latch around the font of the frame, and hook it on to the metal peg.
A
C
F
18
B
D
G
E