Related Manuals for Festo VABA-S6-1-AP
Summary of Contents for Festo VABA-S6-1-AP
- Page 1 VABA-S6-1-AP Electrical interface Operating instruc- tions 8177299 2022-06 [8177301]...
- Page 2 Translation of the original instructions...
-
Page 3: Table Of Contents
10.3 Technical data, electrical ........... . 13 Festo — VABA-S6-1-AP — 2022-06... -
Page 4: Applicable Documents
The qualified personnel have skills and experience in dealing with electrical (open-loop) control technology. Additional information – Contact the regional Festo contact if you have technical problems è www.festo.com. – Accessories and spare parts è www.festo.com/catalogue. Festo — VABA-S6-1-AP — 2022-06... -
Page 5: Product Overview
VTSA-F-MP(-NPT) and the automation system CPX-AP-I. Mounting Depending on the configuration, the electrical interface VABA-S6-1-AP is already integrated in the valve terminal. The product is also suitable for retrofit in existing valve terminals with multi-pin connection type VTSA-MP (-NPT) and VTSA-F-MP (-NPT). -
Page 6: Installation, Electrical
M8 socket, 4-pin, A-coded Signal +24 V DC logic supply PS 0 V DC load supply PL 0 V DC logic supply PS +24 V DC load supply PL Tab. 3: Connection for voltage forwarding Festo — VABA-S6-1-AP — 2022-06... -
Page 7: Earthing
Tab. 6: Response of the LED displays of the module after error-free commissioning Information on troubleshooting in the event of incorrect response: • è 1 Applicable documents,Operating instructions automation system CPX-AP-I. • è 9 Malfunctions Festo — VABA-S6-1-AP — 2022-06... -
Page 8: Operation
Fig. 2: Example of address assignment with 12 valve positions Parameterisation Various parameters are available for reading out information about the modules in an automation system CPX-AP and adapting the modules to the application situation. Festo — VABA-S6-1-AP — 2022-06... -
Page 9: Malfunctions
All diagnostic messages of the automation system and also information on the grouping and display of the diagnostic messages è 1 Applicable documents, Operating instructions automation system CPX-AP-I. The table below contains the diagnostic messages of the module. Festo — VABA-S6-1-AP — 2022-06... - Page 10 02 | 01 | 013F Overvoltage in load Overvoltage in load supply (PL) 24 V DC (33620287) supply (PL) 24 V DC – Check power supply Remedy Diagnos- Error tics status Tab. 9: Diagnostic messages Festo — VABA-S6-1-AP — 2022-06...
-
Page 11: Led Displays
PL red light Module ramp-up not yet completed. – System communication not yet initial- ised. fast red flashing Module identification (service function) – fast green flashing Tab. 10: LED module diagnostics [MD] Festo — VABA-S6-1-AP — 2022-06... -
Page 12: Technical Data
Assigned address [Byte] –/3 space (inputs/outputs) Module code (hex/dec) 0x2022/8226d Module identification VABA-S6-1-AP Electromagnetic com- See declaration of conformity è www.festo.com patibility 1) Valve terminal completely mounted, plug connected. Tab. 12: Technical data, general Festo — VABA-S6-1-AP — 2022-06... -
Page 13: Technical Data, Mechanical
0 V PL to FE [nF] Typically 20 Electrical isolation Between PS and PL Between the channels Short-circuit protection Per channel Electronic Response after end of No automatic recovery the overload Tab. 14: Power supply Festo — VABA-S6-1-AP — 2022-06... - Page 14 Copyright: Festo SE & Co. KG 73734 Esslingen Ruiter Straße 82 Deutschland Phone: +49 711 347-0 Internet: © 2022 all rights reserved to Festo SE & Co. KG www.festo.com...
Need help?
Do you have a question about the VABA-S6-1-AP and is the answer not in the manual?
Questions and answers