Setting The Room Temperature - Viessmann VITOTRONIC 300 Operating Instructions Manual
Hide thumbs
Also See for VITOTRONIC 300:
- Installation and service instructions manual (164 pages) ,
- Operating instructions manual (61 pages) ,
- Technical data manual (8 pages)
Table of Contents
Advertisement
Vitotronic 300: Central heating
Setting the room temperature
This setting can only be made at the Vitotronic 300.
Setting the standard room temperature
Set the room temperature at which you feel comforta-
ble here. This room temperature applies to the time
periods you set in the central heating "Time pro-
gram".
Factory setting: 20 °C
Setting range: 3 to 37 °C
Tap the following on-screen buttons:
1. If required,
for the home screen
2.
for the "Main menu"
3.
"Heating" for central heating settings
Setting the reduced room temperature
Here you can set the room temperature for time peri-
ods during which you require less heat. This room tem-
perature applies outside the central heating time pha-
ses set in the "Time program".
Central heating with this temperature:
■
Between the time phases for central heating at
standard temperature
■
In the holiday program
Factory setting: 3 °C
Setting range: 3 to 37 °C
Tap the following on-screen buttons:
1. If required,
for the home screen
Setting "Operating program" for central heating
This setting can only be made at the Vitotronic 300.
Enable the "Operating program" for central heating.
The setting is required only where one of the following
operating programs is set:
"Only DHW"
"Standby mode"
Tap the following on-screen buttons:
1. If required,
for the home screen
2.
for the "Main menu"
3.
"Heating" for central heating settings
22
4.
"Heating circuit 1"
or
"Heating circuit 2"
or
"Heating circuit 3"
5.
"Room temperature" for the standard room
temperature
6.
/
for the required value
7.
to confirm
2.
for the "Main menu"
3.
"Heating" for central heating settings
4.
"Heating circuit 1"
or
"Heating circuit 2"
or
"Heating circuit 3"
5.
"Reduced room temperature"
6.
/
for the required value
7.
to confirm
4.
"Heating circuit 1"
or
"Heating circuit 2"
or
"Heating circuit 3"
5.
or
for "Operating program"
The set "Operating program" is highlighted.
6.
"Heating and DHW"
or
"Heating" to adjust the central heating.
7.
to confirm
Advertisement
Table of Contents
