General Information Regarding The Handling Of Batteries; Protecting Yourself And Others; Safety Measures In Normal Operation; Emc Device Classifications - Fronius Selectiva 2060 Operating Instructions Manual

General informa- -
tion regarding -
the handling of
batteries -
-
Protecting your- While the charger is in operation, keep all persons, especially children, out of the
self and others working area. If, however, there are people in the vicinity,
-
-
Before leaving the work area, ensure that people or property cannot come to any
harm in your absence.
Safety measures Chargers with a ground conductor must only be operated on a mains supply with
in normal opera- a ground conductor and a socket with a ground conductor contact. If the charger
tion is operated on a mains supply without a ground conductor or in a socket without
a ground conductor contact, this will be deemed gross negligence. The manufac-
turer shall not be held liable for any damage arising from such usage.
Only operate the charger in accordance with the degree of protection shown on
the rating plate.
Under no circumstances operate the charger if there is any evidence of damage.
Arrange for the mains cable to be checked regularly by a qualified electrician to
ensure the ground conductor is functioning properly.
Any safety devices and parts that are not functioning properly or are in imperfect
condition must be repaired by a qualified technician before switching on the
charger.
Never bypass or disable protection devices.
After installation, an accessible mains plug is required.
EMC Device
Devices in emission class A:
Classifications -
-
Devices in emission class B:
-
EMC device classification as per the rating plate or technical data.
Protect batteries from dirt and mechanical damage.
Store charged batteries in a cool place. Self discharge is kept to a minimum
at approx. +2 °C (35.6 °F).
Carry out a visual inspection at least once a week or as often as specified by
the battery manufacturer to ensure that the acid (electrolyte) level in the
battery is at the max. mark.
If any of the following occur, do not start the device (or stop immediately if
already in use) and have the battery checked by an authorised workshop:
- uneven acid levels and/or high water consumption in individual cells
caused by a possible fault.
-
overheating of the battery above 55 °C (131 °F).
warn them about all the dangers (hazardous acids and gases, danger from
mains and charging current, etc.),
provide suitable protective equipment.
Are only designed for use in industrial settings
Can cause line-bound and radiated interference in other areas
Satisfy the emissions criteria for residential and industrial areas. This is also
true for residential areas in which the energy is supplied from the public low-
voltage mains.
7