Rabbit RabbitCore RCM3000 Getting Started Manual page 14

Current Measurement Option
•
be removed and replaced with an ammeter across the pins to measure the current drawn
from the +5 V or the +3.3 V supplies, respectively.
—A motor/encoder header is provided at header J6 for future use.
• Motor Encoder
• LCD/Keypad Module
headers J7, J8, and J10.
10
—Jumpers across pins 1–2 and 5–6 on header JP1 can
—Z-World's LCD/keypad module may be plugged in directly to
RabbitCore RCM3000