Stihl SP 81 Instruction Manual page 6

Fuel your power tool in a well-ventilated
area, outdoors only. If you spill fuel, wipe
the machine immediately – if fuel gets on
your clothing, change immediately.
Your power tool comes standard with
either a screw-type or bayonet-type fuel
cap.
After fueling, tighten down
the screw-type fuel cap as
securely as possible.
Insert the fuel cap with
hinged grip (bayonet type
cap) correctly in the
opening, turn it clockwise
as far as stop and fold the
grip down.
This reduces the risk of unit vibrations
causing the fuel cap to loosen or come
off and spill quantities of fuel.
To reduce the risk of serious or fatal
burn injuries, check for fuel leakage. If
fuel leakage is found, do not start or run
the engine until leak is fixed.
SP 81
Before Starting
Check that your power tool is properly
assembled and in good condition – refer
to appropriate chapters in the instruction
manual:
– Slide control / stop switch must
move easily to STOP or 0
– Smooth action of throttle trigger
interlock (if fitted) and throttle trigger
– throttle trigger must return
automatically to idle position.
– Rakes: Securely mounted and in
good condition (clean, move freely,
not warped or cracked).
– Check that spark plug boot is secure
– a loose boot may cause arcing
that could ignite combustible fumes
and cause a fire.
– Never attempt to modify the controls
or safety devices.
– Keep the handles dry and clean,
free from oil and dirt, for safe
control.
– Adjust harness to suit your height
and reach. See chapter on "Fitting
the Harness".
To avoid the risk of accidents and
personal injury, do not operate your unit
if it is not in a safe operating condition.
Be prepared for an emergency when
wearing a harness: Practise quickly
setting down the unit. To avoid damage,
do not throw the machine to the ground
when practising.
Starting the Engine
Start the engine at least 3 meters from
the fueling spot, outdoors only.
Place the unit on firm ground in an open
area. Make sure you have good balance
and secure footing. Hold the unit
securely – be sure the rakes are clear of
the ground and all other obstructions
because they may begin to run when the
engine starts – also allow space for
movement of the rakes.
English
5