One-Touch Park; Auxiliary Functions - HIKVISION DS-7100HQHI-K1 Series User Manual

3.6.9 One-Touch Park

Certain speed dome models can be configured to start a predefined park action (scan, preset,
patrol, etc.) automatically after a period of inactivity (park time).
Before You Start
Before operating this function, make sure the connected camera supports linear scan and is in
HIKVISION protocol.
Steps
1. Click on the quick settings toolbar of the PTZ camera's live view.
2. Click Park (Quick Patrol), Park (Patrol 1), or Park (Preset 1) to activate the park action.
Park (Quick Patrol)
The dome starts patrolling from the predefined preset 1 to preset 32 in order after the park
time. Undefined presets will be skipped.
Park (Patrol 1)
The dome starts moving according to the predefined patrol 1 path after the park time.
Park (Preset 1)
The dome moves to the predefined preset 1 location after the park time.
Note
The park time can be set only via the speed dome configuration interface. The default value is
5s by default.
3. Optional: Click Stop Park (Quick Patrol), Stop Park (Patrol 1), or Stop Park (Preset 1) to
inactivate it.

3.6.10 Auxiliary Functions

You can operate the auxiliary functions including light, wiper, 3D positioning, and center on the
PTZ control panel.
Before You Start
Make sure the connected IP camera supports the PTZ function, and is properly connected.
Steps
1. Click on the quick settings toolbar of the PTZ camera's live view. The PTZ control panel
displays on the right of the interface.
2. Click Aux Function.
Digital Video Recorder User Manual
41