Human Body Detection - HIKVISION DS-7100HQHI-K1 Series User Manual

9. Click Apply.

5.6 Human Body Detection

Go to Smart Analysis → Smart Analysis → Engine Configuration. Configure at least one engine
usage as Picture Recognition-Human Body. Refer to Engine Configuration for details.
Go to Smart Analysis → Smart Analysis → Task Configuration to enable the task for camera. For
details, refer to Task Configurationfor details.
Note
The chapter is only available for certain models of iDS series.
5.6.1 Human Body Detection
The human body detection enables to detect the human body appearing in the monitoring scene,
and capture the human body pictures.
Before You Start
The connected camera supports the human body detection.
Steps
1. Go to System → Event → Smart Event.
2. Click Human Body.
3. Optional: For IP camera does not support human body detection, Check Enable Local Human
Body Detection. Then the device will consume its decoding resource to execute human body
detection. Before enabling the function, go to Smart Analysis → Smart Analysis → Engine
Configuration to select at least one engine as Video Structuralization-Real-Time.
4. Enabling the function will change smart events supported by the camera.
5. Select the camera to configure the human body detection.
6. Check Save VCA Picture to save the captured pictures of human body detection.
7. Check Target of Interest (Human Body) to discard non-human body pictures and videos which
are not triggered by human body detection. The feature is only available for local human body
detection.
8. Set detection area.
Digital Video Recorder User Manual
74