One-Touch Park - HIKVISION iDS-7700NXI-I4/16P/16S Series User Manual

Note
This function is supported only by certain models.
Steps
1. Click on the quick settings toolbar of the PTZ camera's live view.
2. Click directional buttons to wheel the camera to a location, and click Left Limit or Right Limit to
link the location to the corresponding limit.
Note
The speed dome linear scans from the left limit to the right limit, and you must set the left limit
on the left side of the right limit. Also, the angle from the left limit to the right limit must be not
greater than 180º.

3.12.9 One-Touch Park

Certain speed dome models can be configured to start a predefined park action (scan, preset,
patrol, etc.) automatically after a period of inactivity (park time).
Before You Start
Before operating this function, make sure the connected camera supports linear scan and is in
HIKVISION protocol.
Steps
1. Click on the quick settings toolbar of the PTZ camera's live view.
2. Click Park (Quick Patrol), Park (Patrol 1), or Park (Preset 1) to activate the park action.
Park (Quick Patrol)
The dome starts patrolling from the predefined preset 1 to preset 32 in order after the park
time. Undefined presets will be skipped.
Park (Patrol 1)
The dome starts moving according to the predefined patrol 1 path after the park time.
Park (Preset 1)
The dome moves to the predefined preset 1 location after the park time.
Note
The park time can be set only via the speed dome configuration interface. The default value is 5s
by default.
3. Optional: Click Stop Park (Quick Patrol), Stop Park (Patrol 1), or Stop Park (Preset 1) to
inactivate it.
Network Video Recorder User Manual
37