Chapter 12 System Management; Configure Device; Configure Time - HIKVISION DS-7100HQHI-K1 Series User Manual

Chapter 12 System Management

12.1 Configure Device

Steps
1. Go to System → General.
2. Configure the following settings.
Language
The default language used is English.
Output Standard
Set the output standard to NTSC or PAL, which must be the same as the video input standard.
Resolution
Configure video output resolution.
Device Name
Edit device name.
Device No.
Edit the device serial number. The Device No. can be set in the range of 1 to 255, and the
default No. is 255. The number is used for the remote and keyboard control.
Auto Logout
Set the timeout time for menu inactivity. E.g., when the timeout time is set to 5 minutes, then
the system will exit from the current operation menu to Live View screen after 5 minutes of
menu inactivity.
Mouse Pointer Speed
Set the speed of the mouse pointer; 4 levels are configurable.
Enable Wizard
Enable/disable the Wizard when the device starts up.
Enable Password
Enable/disable the use of the login password.
3. Click Apply to save the settings.

12.2 Configure Time

Digital Video Recorder User Manual
135