HIKVISION DS-7100HQHI-K1 Series User Manual page 90

3. Check Enable Intrusion Detection.
4. Optional: Check Save VCA Picture to save the captured intrusion detection pictures.
5. Set the detection rules and detection areas.
1) Select a virtual panel. Up to 4 virtual panels are selectable.
2) Set Time Threshold, and Sensitivity.
Time Threshold
The time an object loiter in the region. When the duration of the object in the defined
detection area exceeds the threshold, the device will trigger an alarm.
Sensitivity
The size of the object that can trigger the alarm. The higher the value is, the more easily
the detection alarm will be triggered.
3) Click Draw Area.
4) Draw a quadrilateral in the preview window.
6. Set the arming schedule. Refer to Configure Arming Schedule.
7. Set linkage actions. Refer to Configure Linkage Actions.
8. Click Apply.
Note
For iDS-7200 series, you can set Target Detection as Human or Vehicle. Only the target of
selected type will trigger the alarm.
Digital Video Recorder User Manual
Figure 5-7 Intrusion Detection
70