WACON AquaInform Sycon 2500 Operating Manual page 35

C 4 O
HAPTER
L A
IMIT NALYSER
lack of indicator 1.
2.
alarm message 1a. red-flashing + red-flashing
limit exceeded
1b. red-fashing + red
alarm message 2a. blue-flashing + red-flushing
lack of indicator
S
PERATING THE YSTEM
blue:
LED-display lights
thus indicating that the indicator
stocks is less than about 30%
blue-flashing:
the display will flash, signaling that
the stock of indicator is less than
10%. At the same time, the fault
relay REL2 enabled.
BOB-function → page 18
Analysis result
+ alarm (red-flashing):
The display flashes and signals
exceeding the given
connection with the flashing red
display "analysis results".
The relay REL 1 "limit exceeded" is
active
Analysis result
+ alarm (red):
The display lights permanent and
signals exceeding the given limit in
connection with the flashing red
display "analysis results"
→
The relay REL
exceeded" was
automatically by pressing a
button or a pulse control of the
relay
lack of indicator (blue-flashing)
+ alarm message (red-flushing):
The red LED-display flashes and
signals in conjunction with the
flashing blue LED display "lack of
indicator". <10%
→ the fault relay is active.
continuously,
red
(red-flashing)
limit in
(red-flashing)
1 "limit
deleted
P 35
AGE
blue
red
blue red