Table of Contents
Advertisement
P
10
AGE
NOTE
NOTE
WARNING
S
I
AFTY
NSTRUCTIONS
Storage
We recommend storing equipment not longer than a year, because you lose the
warranty. Store equipment under following conditions.
●
Cool and dry location / ambient temperature between -5 and 45 °C
Scope of Delivery
Scope includes the following modules:
●
Equipment in accordance with the delivery of the ordered form
●
Operating Manual
Check that all parts were delivered.
Obvious damage and / or missing components must be reported in writing
within 8 days of receipt of goods. After that, no complaints will be accepted
Installation
The installation of the device includes the following:
►
Install the system in accordance with the following sequence. So you
save time and avoid damaging the plant, which can lead to malfunction.
●
Mounting of the device:
→ Place device in a dry, easily accessible and conspicuous place.
→ Drill holes in the wall according to template (typically, these are four
holes) and tighten the device by means of screws (usually four
screws).
●
Connect the initiators (eg level sensor)
●
Connecting the actuators (for example pumps, valves)
●
Connect the power supply
Make sure the correct input voltage
for example :
230 VAC or 115 VAC or 24 VAC
For correct supply voltage, refer to the nameplate of the unit
● Program the device (setting of parameters and conditions).
→
Note the information in the manual
C
1
HAPTER
L
A
IMIT
NALYSER
Advertisement
Table of Contents
