Intermec EasyCoder PM4i Installation Instructions Manual page 3

Patent Information
This product is covered by one or more of the following U.S. patents:
4,739,328; 4,786,907; 4,864,158; 4,888,591; 4,999,636; 5,030,807;
5,055,659; 5,280,159; 5,504,485; 5,521,601; 5,550,547; 5,673,037;
5,763,867; 5,777,561; 5,825,045; 5,828,318; 5,828,693; 5,850,181;
5,850,187; 5,942,987; 5,995,019; 6,078,251; 6,121,878; 6,122,329;
6,172,596; 6,195,053; 6,249,227; 6,280,544; 6,286,762; 6,286,763;
6,288,629; 6,360,208; 6,384,712; 6,404,325; 6,429,775; 6,486,769;
6,501,807; 6,525,648; 6,639,509; 6,645,327; 6,677,852; 6,768,414;
6,784,789; 6,816,063.
There may be other U.S. and foreign patents pending.
FCC Notice (United States of America)
WARNING
This equipment generates, uses, and can radiate radio frequency energy
and if not installed and used in accordance with the instructions manual,
may cause interference to radio communications. It has been tested and
found to comply with the limits for a Class A computing device pursu-
ant to Subpart J of Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference when operated in a com-
mercial environment. Operation of this equipment in a residential area
is likely to cause interference in which case the user at his own expense
will be required to take whatever measures may be required to correct the
interference. The radio is compliant with FCC Part 15 section 247.
RFID Kit (Gen 2, 869/915 MHz) Installation Instructions iii