Intermec EasyCoder PM4i Installation Instructions Manual page 12
Hide thumbs
Also See for EasyCoder PM4i:
- User manual (186 pages) ,
- Installation instructions manual (40 pages) ,
- Safety instructions (24 pages)
Advertisement
7
4
5
1
3
2
Slide the I/O board halfway into the empty slot next to the printer's CPU board (1).
Connect the two using the I/O bus cable (2). Slide the board all the way in and affix it
to the CPU board with the spacer screw and a M4x6 screw (3). Secure the I/O board
with two M3 screws in the printer's rear plate (4). Mark the I/O board with the RFID
label (5).
6
RFID Kit (Gen 2, 869/915 MHz) Installation Instructions
Advertisement
