Empatica EmbracePlus Instructions For Use Manual page 127

EMC ENVIRONMENT
Guidance and Manufacturer's declaration - electromagnetic emissions
EmbracePlus is intended for use in the electromagnetic environment
specified below. The user of the EmbracePlus should assure that it is
used in such an environment.
Emission Test
RF emission
CISPR 11
RF emission
CISPR 11
Harmonic
Emission
EN 61000-3-2
Voltage
Fluctuation/
flicker
emission
EN 61000-3-3
FCC COMPLIANCE
The EmbracePlus device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
Compliance Electromagnetic environment
Group 1 EmbracePlus uses RF energy only for
its internal function. Therefore, its
RF emissions are very low and are
not likely to cause any interference in
nearby electronic equipment.
Class B The EmbracePlus device is suitable
for use in domestic establishments
and
Not
connected to the low voltage power
Applicable
supply
buildings
purposes.
Not
Applicable
in establishments
network that
used for
directly
supplies
domestic
126