Installing The Lan Driver; Windows 98, 98Se, Me, 2000 (Lan Driver) - D-Link DSL-260I User Manual

Installing the LAN Driver

Before starting the LAN driver installation process, close all open windows and quit any application programs
you are running. There are two installation procedures presented here, the first is for Windows 98, 98SE, ME,
and 2000 operating systems. The second is for Windows XP. Follow the procedure for your system.
IMPORTANT: DO NOT CONNECT THE USB CABLE UNTIL INSTRUCTED TO DO SO.
INSTALL THE MODEM SOFTWARE BEFORE YOU CONNECT THE USB
CABLE.

Windows 98, 98SE, ME, 2000 (LAN Driver)

1. Insert the DSL-260I Installation CD into the CD-ROM drive. The system should detect the installation
program and run the program automatically. If installation does not begin automatically after a few
seconds, find the start.exe icon located on the CD and double-click this. To view the contents of the
CD, open My Computer from the desktop, and right-click on your CD-ROM. Select the "Explore"
option and this will reveal the folders and files on the CD.
2. Click the "Driver Install" button.
3. The "Driver Type Selection" window appears. Click the "LAN" button.
DSL-260I ADSL USB Modem User's Guide
7