Connect To Internet - Lan Driver Users; Windows 98 Or Windows Me (Lan Driver) - D-Link DSL-200 User Manual

Adsl usb modem

Hide thumbs Also See for DSL-200:

Table of Contents

If your ADSL connection uses either the RFC 1483 or the RFC 1577 protocol, you must

set your own TCP/IP configuration. The following information will be provided to you by

your DSL service provider:

IP Address,

Subnet Mask,

Gateway

DNS Host Name

DNS Domain

DNS Server

Follow these steps if you are using the RFC 1483 or RFC 1577 protocol on a computer

running Windows 98 or Windows Me.

1. From the Start menu, select Settings, Control Panel, and then double-click on the

Network icon.

2. The Network window will appear. Select the Configuration tab, scroll down

the installed network components list and click on TCP/IP

USB ADSL Modem

3. Click the Properties button.

4. The TCP/IP Properties window will appear. Select the IP Address tab and

then select the Select an IP address option. Enter the IP Address and Subnet

Mask settings given to you by your ISP or ADSL service provider.

5. Select the Gateway tab and enter the IP settings in the New gateway field.

Click Add.

6. Select the DNS Configuration tab. Select the Enable DNS option.

7. Type in your host name in the Host: field.

8. Type in your domain name in the Domain: field.

9. Enter the DNS settings in the DNS Server Search Order field and click Add.

If you have more than one DNS IP address, repeat this step. You can have up to 3

DNS servers listed here.

10. After all the TCP/IP information has been entered, click OK.

Connect to Internet - LAN Driver Users

D-Link DSL-200

Table of Contents