Step 9 - WCP SS Swerve (BLDC) User Manual

WCP SS Swerve (BLDC)- User Guide
(Rev 1)

Step 9

Use the 4 #10-32 x 3"L bolts and the 4 2"L spaces to attach the two halves of the gear-
box. The bolt locations can be seen highlighted in red. These holes should be clearance
holes for a #10-32 bolt.
Note: The one bolt that go through all the plates and threads into the motor may need a
washer if it hits the internals of the motor�
WCP SS Swerve (BLDC)- User Guide (Rev 1) Page 23
wcproducts.com