Wheel Module - Step 4 - WCP SS Swerve (BLDC) User Manual

WCP SS Swerve (BLDC)- User Guide
(Rev 1)

Wheel Module - Step 4

Insert the 45T bevel gear by either tapping it in with a deadblow or using an arbor press.
The #10-32 bolts can be used to pull the bevel gear flat.
Warning: Be sure to allign the bolt holes in the gear and wheel before pressing in.
The drive axle is symmetric. The orientation it is assembled in does not matter.
WCP SS Swerve (BLDC)- User Guide (Rev 1) Page 12
wcproducts.com