Auto Reset; Hold Time; Display; Multiplier - norbar NORTRONIC Operator's Manual

Auto Reset (Hold Time ?)

Auto Reset ?


•  = Hold the torque (and angle) values the length of the
removed and then reset the display to 0.
•  = Hold the torque (and angle) values until the ZERO button
the display to 0.

Hold Time ?

Hold Time ?
4
Sec
• Minimum = 1, Maximum = 10. Default =

Display

Inverse ?

•  = Black digits on White
display.
WARNING:

Multiplier

Multiplier ?
125.000
• Minimum = 1.000, Maximum = 1000.000. Default =
All manuals and user guides at all-guides.com
Press or
If , pressing
Time ?'. If the user will return to SETUP.
,
Press or
Press or
4
Press or
Press or
background,  = White digits on
WHITE DIGITS ON BLACK BACKGROUND WILL REDUCE THE
OPERATIONAL BATTERY LIFE BY APPROXIMATELY 65%.
Press or
Press or
to change setting.
or will take the user to
Hold Time setting after the torque has been
has been
to change value.
to confirm and go to
to change setting.
to confirm and go to
Black background, when in the
to change value.
to confirm and go to
1.000
'SETUP Hold
pressed and then reset
SETUP (saving changes).
SETUP (saving changes).
Measure
SETUP (saving changes).
21