Angle Limits; Units; Date & Time - norbar NORTRONIC Operator's Manual

Angle Limits

Angle ?
HI Limit
LO Limit
• Target + HI Limit, Target - LO Limit in degrees (°).
• Minimum = 0, Maximum = 20. Default =

Units

Units ?
N·m Kgf·m
dN·m Kgf·cm
cN·m gf·m
• Press the button with
Units ?
lbf·ft in·lb
lbf·in ozf·in
ft·lb in·oz
• Minimum Enabled = 1, Maximum Enabled = 1. Default =
Date & Time
Date & Time ?
24 01 14
16:05:14
• 24 hour clock format. The
Date format can be changed
•
18
All manuals and user guides at all-guides.com
Press or
4
Press to confirm and go to
4
Press to exit to
4.
Press or
Press to select Unit and Exit.
Press to exit to
'gf·m' highlighted to go to
Press or
Press to select Unit and Exit.
Press to exit to
Press or
Press or
(month, year, hours, minutes &
Time & Date will always be checked and
in TDS Set Tool Options, DD/MM/YY, MM/DD/YY or YY/MM/DD.
to change highlighted value.
LO Limit.
SETUP (saving changes).
to highlight required unit.
SETUP (no changes).
2 nd units screen (shown below).
to highlight unit.
SETUP (no changes).
N.m.
to change highlighted value.
to confirm and step onto next change
seconds).
updated when synchronising to TDS.