Humanscale Path Chair Disassembly Instructions Manual page 10

Path Chair
Tools Required
Remove Seat Assembly
Step 1
Pry off seat upholstery from back corners using flat
bladed screwdriver or prybar.
Note: Location of clips identified with arrows.
Step 2
After clips release, slide seat upholstery to rear and
lift to remove.
Note: Clips may remain in upholstery plate or seat
structure. Remove from either. May require use of
slip-joint or needle-nose pliers to remove if still in
seat structure.
Some components may not be recyclable in your area.
Disassembly Instructions
Safety Glasses Flat Screwdriver Prybar Plier
See-through View of Seat
Needle Nose Plier
1
2
REV-00