2 Product description
Scope of delivery
Function
Configuration
Versions
4
2
Product description
The scope of delivery encompasses:
•
Screwed housing with pin insert
•
Connector housing with insert
•
Contact sleeves for connector housing
•
Documentation
– This supplementary instructions manual
The plug connector is an accessory part for sensors with single or
double chamber housing. It is used as separable connection to power
supply and signal processing.
The plug connector consists of the screwed housing, the connection
cable to the sensor electronics as well as the connector housing. The
individual cores of the connection cable are marked with figures for
the terminals of the electronics module. The connector housing is
available in straight and bent version.
2
1
Fig. 1: Configuration plug connector Harting HAN 8D - Example straight version
1
Connection cable
2
Counter nut
3
Screwed housing
4
Locking clip
5
Connector housing
The plug is available in straight or bent version.
The bent version may only be used on the following houses:
•
Stainless steel - precision cast housing
•
Aluminium housing
Plug connector Harting HAN 8D • for continuously measuring sensors
3
4
5